Blue Inkjet Film Medical Dry Film For CR, DR, CT, MRI

Product Information:

The blue polyester base is used as the support body, and it is coated on both sides, one side is coated with a back layer, and the other side is coated with a thermosensitive imaging layer and a thermosensitive protective layer. It is suitable for hard copy output of medical digital images such as CR, DR, CT, MRI, etc., and can truly reproduce various medical images. This product is non-sterile.

Item No.: GF970

Size: 8in X 10in, 10in X 12in, 10in X14in, 11in X 14in, 14in X 14in, 14in X17in

Fog Density : ≤0.08

Average Slope : 1.8 ± 0.3

Film Speed : 30-60

Maximum Density : ≥2.9

Storage Condition:

The product should be stored in a dry, cool, and dust-free room to prevent direct sunlight and acid and alkali gases. Specific requirements are as follows:

1. Temperature and humidity: temperature 10°C-23°C, relative humidity 30%-65%, store away from heat sources.

2. Gas: There must be no acidic and alkaline gases such as hydrogen sulfide, helium, sulfur dioxide, etc. in the storage room.

Precautions:

Appearance quality: The appearance of the product should be clean, without obvious adhesion, the edges of the film should be smooth and clean, without obvious burrs, and the coating should have no obvious defects such as peeling, wire drawing, streaks, air bubbles, and mechanical scratches or other defects that affect the use .

The film stored at low temperature should be taken out before use, and the original package should be balanced in the use environment for more than 4 hours before opening the package to avoid moisture condensation on the surface of the film and damage to the film.

Company Advantage:

1. Recognized as a high-tech enterprise in China, a number of patent and software copyright applications have been approved.

2. Deliver goods in accordance with the order request

3. ISO13485, CE, Prepare a variety of shipping documents

4. Respond to customer inquiries within 24 hours